How to build JeNo 5.1
4-DoF quadcopter · Beginner
JeNo 5.1 is a CC BY 4.0 5.1-inch FPV frame for DJI O3/O4 with DXF, STEP and STL files and Classic, Light and Bando variants. The vendor kit is €62.90.
Mostly printed parts and plug-in servos. Good first build.
Our estimate, part-time
€62.90 for the vendor frame kit
CC-BY-4.0
What is JeNo 5.1?
JeNo 5.1 from WE are FPV is an open-hardware 5.1-inch frame for freestyle, freeride and cinematic flying. It's designed around the DJI O3/O4 Air Unit so the camera has a clear view.
The repo has DXF, STEP and STL files for the carbon frame and printed TPU protection, in Classic, Light and Bando versions with several camera plates.
It's a frame only. You choose the motors, stack, props and battery yourself.
JeNo 5.1 specifications
- Size
- 5.1"
- Video
- DJI O3 / O4
- Variants
- Classic, Light, Bando
- Stack
- 30×30 or 20×20
Figures as published by the project. See Sources below.
Bill of materials
| Part | Qty | Notes |
|---|---|---|
| Carbon frame (DXF/STEP) | 1 | |
| TPU protection parts | — | Printed separately |
| M3×30 body standoffs | 8 | |
| Stack, plate and arm fastener sets | — |
Where's the full bill of materials?
The full BOM, with exact quantities and vendors, lives in the project's own files. Prices change often, so treat €62 as a ballpark from the project. Start at the project repository.
Tools you'll need
- Hex drivers
- TPU-capable printer
- Soldering iron
Step-by-step build overview
Electronics & wiring overview
Depends on your stack. The frame has 30×30 and 20×20 mounts.
Software
Not applicable. Use your flight controller's firmware (e.g. Betaflight).
Tips from the bench
- ☕ The Bando variant is meant for flying around abandoned structures.
JeNo 5.1 FAQ
Does it include electronics?
No. It's just the frame.
Sources
Written by Bots n' Beans from the project's own documentation. Check the sources for the latest revision before you buy parts.
Related builds
Robot deals
All deals →
Get dealDeal · Everblog
10% off
ShopShop · CircuitMess
DIY robot kits
Robot and gadget kits you build yourself.
ShopShop · GRABO
Cordless vacuum lifter
GRABO Pro Brushless: the original cordless vacuum lifter for pavers, stone, glass and panels.
Like what we do? Buying through these links supports Bots n' Beans. We earn a commission at no extra cost to you. Thank you!