Lead Robotics Technician

Job description

Job responsibilities

• Keep the collection floor running: diagnose, repair and maintain robot arms, hands, wheeled bases, station computers and cameras, and the wearable collection kits (head-mounted cameras, gloves, wireless hubs);
• Assemble and bring up Eno units as production starts: build from assembly drawings and work instructions, run the end-of-line checks, and maintain the fleet once it is running.
• Set up stations and sites: build new stations from the station BOM, reconfigure them when the layout changes, and set up stations for deployments at partner and customer sites so they run the same way they run here.
• Design and build mini fixtures, jigs, brackets and cable harnesses: crimped and soldered connectors to a workmanship standard, built to drawing or to your own sketch when the drawing does not exist yet.
• Run calibration and readiness: arm, hand and camera calibration on cadence and after any repair; daily station checks; the tests that say a station is ready for collection or evaluation.
• Find the root cause: every failure gets a tag from our failure list and a short write-up; repeat failures get a real investigation with the engineers and a fix that sticks.
• Keep the records: unit, serial, what failed, what was done, parts used, in our fleet and maintenance system; spares and consumables stocked and reordered before they run out.
• Support the engineers: real-robot testing with the reliability team, retrofits and hardware changes on the floor, feedback on what breaks and why.

Job requirements

• Five or more years as an electromechanical, robotics or test technician in a lab, pilot line or production environment. Robots, automation, vehicles, medical devices or lab instruments all count.
• You read assembly drawings, schematics and wiring diagrams and build from them.
• You build cables and fixtures: crimping, soldering, connector assembly, strain relief, basic fabrication, and you can design a simple fixture when none exists.
• You troubleshoot with instruments: multimeter, oscilloscope basics, continuity and power checks, and you are comfortable at a Linux command line to read logs, restart services and run scripts.
• You have run calibration or alignment procedures on robots, cameras or sensors and know why cadence and documentation matter.
• You think in root cause, not symptoms, and you write it down.
• You are organized about parts, tools and records, and you notice when something is off.
• You have trained or led other technicians, or you are ready to.